Dirt haul 2-6 ton in Oklahoma City, OK

Fill dirt is unscreened subsoil used to raise grade, fill voids, or build up low areas, while screened topsoil is the nutrient-rich upper layer used for lawns, gardens, and planting beds. If you are leveling a yard in Moore or Mustang and plan to lay sod on top, you typically need fill dirt for the base and topsoil as the finished layer.

One ton of fill dirt covers roughly 100 square feet at a 2-inch depth, so a 2 to 6 ton load handles small to mid-size fill jobs on most Edmond or Yukon residential lots. Measure the length, width, and depth of the area you need to fill, then contact GDS to confirm the right load size for your site.

A loaded dump truck needs a clear path at least 12 feet wide with roughly 14 to 15 feet of vertical clearance to reach most Oklahoma City residential sites safely. Low-hanging branches, narrow gates, soft ground from recent rain, and underground pipes near the drop zone are all things to check before the truck arrives.

Hauling and dumping the load at your drop point is what this service covers; spreading is a separate scope of work handled under grading services. If you need the dirt graded or spread after delivery in Norman or Newcastle, ask about grading options when you call.

Fill dirt and topsoil are commonly sold by the ton, but project coverage is easier to picture in cubic yards: one cubic yard of fill dirt weighs roughly 1.2 to 1.4 tons depending on moisture content. When you call GDS, share your square footage and target depth and we can help translate that into the right tonnage for your Blanchard or Piedmont job site.

Yes, GDS serves Yukon, Mustang, Tuttle, Piedmont, Newcastle, El Reno, Weatherford, Blanchard, Edmond, Moore, Bethany, Hinton, Warr Acres, Norman, Guthrie, Minco, and Bridge Creek in addition to Oklahoma City. Call to confirm service availability for your specific address.